1,027 found, showing page 10 of 26
$26.99
3/4x12 HAMMERDRILL BIT DIABLO
3/4X12 HAMMERDRILL BIT
View Details
$42.99
3/8" IMPACT CHUCK
1/4" hex quick connect allows users to easily change from fastening to drilling. Single sleeve design allows for single handed tightening. Built with all metal construction for maximum durability. Includes arbor.
View Details
$8.49
12-24 TAP & DRILL SET
High speed steel drill bits ensure fat, precise drilling. High-carbon steel taps are ideal for general-purpose threading. Matching bit and tap provide proper hole size for easier tapping and stronger threads. Carded.
View Details
$10.49
TAP 5/16-18 DRILL F
High speed steel drill bits ensure fat, precise drilling. High-carbon steel taps are ideal for general-purpose threading. Matching bit and tap provide proper hole size for easier tapping and stronger threads. Carded.
View Details
$149.99
20V ATOMIC 1/4 IMP DRVR
20V ATOMIC 1/4 IMP DRVR
View Details
$3.79
1/4" SQ SOCKET ADAPTER DIABLO
1/4" SQ SOCKET ADAPTER
View Details
$44.99
*18V SLIDE PACK BATTERY
18V slide pack battery is suitable for a wide range of products. Built in quick release functionality for easy removable.
View Details
$220.00
1/2" IMPACT WRENCH
Square drive, 300 Ft./Lb. of torque. 7.0A motor at 1800 rpm, 2600 IPM. Features a pin-detent system to securely retain sockets or adapters and AC/DC rocker switch for quick selection of forward or reverse. The ergonomically shaped handle with a soft cushioned-grip provides a well balanced and controllable feel to the tool.
View Details
$12.49
*BIT EXTENSION 12"
Tempered steel shank extends 1/4" drill shanks for deep holes and hard-to-reach areas. Fits any drill. Double set screw with hex wrench included. Carded.
View Details
$9.99
#6 WOOD COUNTERSINK BIT
Replacement drill bits with countersinks. Multi-cutter countersinks for superior finish. Black oxide split-point drill bits start on contact. Carded.
View Details
$9.99
#8 COUNTERSINK BIT
Replacement drill bits with countersinks. Multi-cutter countersinks for superior finish. Black oxide split-point drill bits start on contact. Carded.
View Details
$9.99
#10 COUNTERSINK BIT
Replacement drill bits with countersinks. Multi-cutter countersinks for superior finish. Black oxide split-point drill bits start on contact. Carded.
View Details
$10.99
1/4x13 DIB MASONRY DRILL BIT
For rotary drilling in concrete, brick, and masonry. Fast spiral, double flutes quickly clear material from hole. Zinc finish. Carded.
View Details
$15.99
5/16x13 DIB MASONRY DRILL BIT
For rotary drilling in concrete, brick, and masonry. Fast spiral, double flutes quickly clear material from hole. Zinc finish. Carded.
View Details
$23.99
3/8x13 DIB MASONRY DRILL BIT
For rotary drilling in concrete, brick, and masonry. Fast spiral, double flutes quickly clear material from hole. Zinc finish. Carded.
View Details
$24.49
1/2x13 DIB MASONRY DRILL BIT
For rotary drilling in concrete, brick, and masonry. Fast spiral, double flutes quickly clear material from hole. Zinc finish. Carded.
View Details
$17.29
5/8x13 DIB MASONRY DRILL BIT
For rotary drilling in concrete, brick, and masonry. Fast spiral, double flutes quickly clear material from hole. Zinc finish. Carded.
View Details
$25.99
3/4x13 DIB MASONRY DRILL BIT
For rotary drilling in concrete, brick, and masonry. Fast spiral, double flutes quickly clear material from hole. Zinc finish. Carded.
View Details
$31.99
7PC LG DRILL BIT KIT
3-Flat Secure-Grip shank holds the bit firmly in the chuck for reduced slipping. Reinforced flute geometry increases bit stability for faster drilling. Carbide tips extend performance in masonry applications. 3-Flat Secure-Grip shank fits in all 1/2" three-jaw hammer-drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Set includes 1 each: 5/32", 5/16", 3/8", 3/16", 1/4" in 6" lengths.
View Details
$6.29
3/8" COUNTERSINK
Countersink, deburr, and chamfer holes in soft metal and wood. 1/4" shank. 1 per card.
View Details
$6.99
1/2" COUNTERSINK
Countersink, deburr, and chamfer holes in soft metal and wood. 1/4" shank. 1 per card.
View Details
$5.99
1/2-1 WATER GUIDE
For use with Hitachi diamond grit glass and tile bits.
View Details
$118.99
12V COMPACT DRIVER KIT
REDLITHIUM battery technology offers superior pack construction, electronics, and performance to deliver more work per charge and more work over pack life. Quick-change chuck allows for fast, one-handed bit changes. Variable speed trigger provides increased control, especially when working in small spaces or at awkward angles. Battery fuel gauge displays remaining run time. Features a metal gearcase for jobsite durability and an LED (light emitting diode) light to illuminatedark spaces. Lightweight, ergonomic design allows tool to fit comfortably in tight workspaces as well as a pocket or tool belt. Length: 7". Weight: 2 lb (pound). Kit includes (2) M12 REDLITHIUM batteries, (1) 30 minute M12 lithium-ion battery charger.
View Details
$204.00
18V 1/2" DRIVR/DRILL KIT
The powerful 18V compact lithium-ion drill/driver drives up to 2 times more screws in a single charge. 4-pole framelessmotor features a robust design combined with rare-earth magnets for longer life. Drill has 500 in/lb (inch/pound) of torque. Batteries have fuel gauges to monitor battery levels. Drill has a ratcheting clutch to prevent over tightening andstripping of screws. All metal gear case and chuck provide maximum impact and shock durability. Kit includes 2 lithium-ion batteries, 30 minute charger, carrying case.
View Details
$2.99
*NUTSETTER 6MM
Magnetic nutsetter for use on hex head screws and nuts. Fits all drills and screwdrivers.
View Details
$8.59
10PK 3-3/4 120G TRI SAND
10PK 3-3/4 120G TRI SAND
View Details
$4.99
8MM MAGNETIC NUTSETTER
Magnetic nutsetter for use on hex head screws and nuts. Fits all drills and screwdrivers.
View Details
$5.19
10MM MAGNETIC NUTSETTER
Magnetic nutsetter for use on hex head screws and nuts. Fits all drills and screwdrivers.
View Details
$6.19
*NUTSETTER 14MM
Magnetic nutsetter for use on hex head screws and nuts. Fits all drills and screwdrivers.
View Details
$23.99
5PK 9" 18T TORCH BLADE
Heavy-duty metal demolition blade is designed to reduce bending and breaking. Double Duty Upgrade features a tooth form optimized for the longest life and maximum durability. Tough Neck ribs strengthen the blade tang and minimize breakage. Grid Iron honeycomb pattern throughout body of blade increases blade rigidity to resist blade buckling. Ideal for making tough, straight cuts.
View Details
$24.99
5/8" SPLIT POINT BIT
135 deg. split point for no slip starting on hard materials. Parabolic flute design for improved heat dissipation and increased life. Industrial M7 grade steel for high-performance drilling in metal, wood, and plastic. Black oxide coated for longer life and greater resistance to wear. Jobbers length. For drilling through metal, wood, fiberglass, stainless steel.
View Details
$8.59
10PK 3-3/4 220G TRI SAND
10PK 3-3/4 220G TRI SAND
View Details
$19.49
*10" PROTOUCH MULTI SAW
Extra thick blade is available in metal and wood. Ergonomic ProTouch handle provides comfort and control. Includes: (1) 10" 24T metal blade, and (1) 5-1/4" 10T work blade.
View Details
$49.99
*13PC COBALT DRILL SET
Engineered for extreme durability and long life in hard metal applications. Designed with a variable helix that includes an aggressive 35 deg (degree) helix angle which ends at 15 deg. Cobalt bits with RED HELIX provide rapid chip removal limiting heat buildup to stay sharper longer. 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Ideal for tough applications. Applications include wood, stainless steel, metal, plastic, PVC (polyvinyl chloride). Sizes include 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 1/2".
View Details
